KAWASAKI Z1000 Z900 1972-1976 STAINLESS REVERSE CONE STYLE EXHAUST SYSTEM

Upgrading to a Delkevic 4-into-1 exhaust can transform your Vintage Kawasaki, offering both performance gains and a more commanding presence on the road. Delkevic exhausts are known for their deep, aggressive sound, which will make your old twin cam stand out from the rest, its character, sound, and presence make it a truly special experience for those who appreciate vintage motorcycles.

All Delkevic complete systems come with gaskets (where needed) clamps. We manufacture all our exhaust components in our own factory employing the most stringent quality control procedures.

Fits

1972 Kawasaki Z1
1973 Kawasaki Z1
1974 Kawasaki Z1A
1975 Kawasaki Z1B 900
1976 Kawasaki Z900A4

Frequently Asked Questions

• What is the downpipe outer diameter?.
  The outer diameter is 32mm.
• What is the collector outlet outer diameter?.
  The collector outlet where the silencer joins is 64mm o.d.
• What size are the header port gaskets?
  The header port gaskets are 41mm.
• Can I get to my sump nut and oil filter without removing the header pipes?.
  Yes you can, our systems allow oil filter removal and sump nut access without removing the header pipes.
• Can I get replacement gaskets and springs?.
  Yes we have all the spares in stock ready to go.
• How do I clean the headers?
  See fitting instructions section.
• Which end does the baffle come out?.
  This silencer has a twin stage baffle that comes pre installed, You can remove the inner spark arrestor baffle with one allen key bolt for a little more note and less back pressure, or you can remove the inner cartridge to have the full drag pipe effect.
• Is this a loud silencer?..
  Yes this can be moderate to loud on some engine configurations.
• Do you have a quieter baffle for this silencer?.
  Not currently however the standard baffle it comes with does a pretty good job.
• Can you repack this silencer?..
  No these are not repackable silencers however replacement internal cartridges are available.
• What is the inlet I.D of the silencer?
  Inlet I.D is 64mm and is a pretty standard size for most applications.
• What is this silencer made from?
  This is made from 304 stainless steel and is highly polished and has a brushed alloy end cap.
• Can I retain the center stand?..
  Yes, You can retain your center stand, Our system comes with a stainless stand stop that bolts to the silencer no mods needed.
• How long do I allow the sealant to dry?
  We recommend you leave the sealant to cure for 24hrs before starting the bike.
• Where do I use the sealant?
  Use the sealant on every pipe to pipe join as this will help seal the system and prevent any exhaust gas leaks.

COM4955